Abstracts: Fuel cells: Technology and Applications
Fuel cells: Technology and Applications
- A Compact JP-8 Fueled SOFC Power System for Military Applications
- AC impedance diagnosis of a small DMFC stack
- Advanced Design of a Central Manifolding Device Mitigating Massive Flow Resistance in a Polymer Electrolyte Fuel Cell Stack
- An improved Microbial Fuel Cell (MFC) design
- Analysis of anodic and cathodic purges management in PEM fuel cells
- Benefits of On-Board Hydrogen Production Utilizing High Temperature Steam Reforming in Fuel Cell-Powered Transit Buses
- Biogas from anaerobic digestion as biogenous fuel for solid oxide fuel cells: an experimental assessment
- Bridging the Gap to a Hydrogen Economy
- Ceria-based Two Phase Materials and Mesoporous Components for Advanced 300-600ºC Fuel Cell Technology
- Characteristics of hot-pressing condition on the MEAs in a polymer electrolyte fuel cell
- Characteristics of Various Gas Flow Types in a Molten Carbonate Fuel Cell
- Combined observation of current distribution and two-phase flow in a direct methanol fuel cell
- Computer simulation of a polymer electrolyte membrane fuel cell (PEMFC)
- Computer simulation of solid oxide fuel cell (SOFC)
- Cost minimized design approach for the polymer electrolyte membrane fuel cell stack
- Design and Characterization of Passive DMFC Monopolar Mini-Stacks for Operation at Room Temperature
- designing, manufacturing and optimization of a PEM fuel cell system
- Development of a 1kW class anode-supported tubular solid-oxide fuel cell in KIER
- Development of a double-ejector and its control system to reuse the oxygen for a submarine fuel cell
- Development of Biomass-oxygen Photoinduced Biofuel Cell
- Direct Methanol Fuel Cell Systems – An Option for Fork-lift Trucks
- Effect of A-site deficiency in (La0.75Sr0.25)1-xFeO3-δ Used as Cathode Materials for Solid Oxide Fuel Cell
- Effect of flow pattern geometry and operating conditions in PEM fuel cell
- Effect of gas diffusion layer on the water management in micro-PEMFC stacks
- Effect of Humidification Temperature on Power Generation Performance in Small Polymer Electrolyte Fuel Cells
- Effect of sub-zero condition on the performance and properties of GDL in PEFCs
- Electrolytes for Solid Oxide Fuel Cells from Aqueous Tape Casting of YSZ
- Ergon Energy's Trial of Fuel Cell Technology
- Fabrication and performance test of anode-supported tubular solid oxide fuel cell with (La, Sr)(Co, Fe)O3-based cathode
- High Response and Low Power Hydrogen Gas Sensor for Fuel Cell Vehicle
- Hybrid fuel cell supercapacitor system for Hy-IEL electric scooter drive
- Hydrogen fuel cell Vehicles for the 3rd millennium
- Hydrogen Generation by Biomimicking Molecular Catalyst for Water Splitting
- Hydrogen or Methanol Economy?
- Hydrogen, RWE and Domotics: energy saving towards zero emissions home
- Improvement of Cathode Performance for Low Temperature Solid Oxide Fuel Cells
- Investigation of composite Ni-doped perovskite anode catalyst for electrooxidation of hydrogen and light hydrocarbons in solid oxide fuel cells
- La0.6Sr0.4Co0.2Fe0.8O3-Sm0.2Ce0.8O1.9 anode materials for SOFC applicatio
- Local Current Mapping on a PEM Fuel Cell
- Miniature planar stack using the thin Au coated membrane as a current collector
- Modeling of the transient diphasic mass transport effects on voltage in a PEMFC single cell
- Modelling and Performance Measurement of Unitised Regenerative Fuel Cells
- Modelling of the electric and thermal characteristics of Solid Oxide Electrolysis Cells used for hydrogen production
- Modulating hydrogen combustion system based on a porous media burner for HT-PEM systems
- Nano-SDC for Low Temperature SOFCs
- Numerical Modelling of Single-Chamber Solid Oxide Fuel Cells (SC-SOFCs)
- Numerical Simulation for Rib and Channel Position Effect on PEMFC Performances
- Operation and experimental activities of the Siemens SOFC generators CHP100 and SFC5 in a mechanical workshop
- Operation of DMFC stack and diagnosis for the performance degradation
- Operation of the Siemens SOFC Generators CHP100 and SFC5 in a Workshop
- PEM Fuel cell optimal humidification analysis versus hydrogen supply modes (dead-end and flow-through)
- Performance and fabrication of 1kW class anode-supported flat tubular SOFC stack
- Plasma technology serving the hydrogen economy
- Power Generation Performance of Small Direct Methanol Fuel Cells
- Preparation and characterization of PtRu/C catalysts for DMFC anode catalyst: Effect of reducing agent concentration during the preparation
- Preparation and photoelctrochemical characterization of CuGaSe 2 thin films for hydrogen production
- Promotion and Characterization of PtAu/C Cathode Catalysts for Oxidation Reduction Reaction
- Properties of selected materials for IT-SOFC electrolyte
- Pt and PtCo Electrocatalysts Prepared by Mechanical Alloying and Metal Organic Chemical Vapour Deposition for the ORR Reaction in Alkaline Media
- Pt Incorporated Hollow Core Mesoporous Shell Carbon Nanocomposite Catalyst for Proton Exchange Membrane Fuel Cells
- Reduction of Greenhouse Gas Emissions through Fuel Cell Combined Heat and Power applications
- Renewable hydrogen production and fuel cells programs in Brazil: an overview
- Research into Ta-coated 316L stainless steel as a bipolar plate material for PEMFC
- Short-lived Hydrogen from Middle Distillates for Use in Auxiliary Power Units
- Synthesis and characterization bimodal nanoporous carbon materials for the electro-catalyst in PEFC
- The catalytic activity of ternary catalysts for Methanol Oxidation
- The preparation and mechanical properties of the LiAlO2 matrix reinforced by metal mesh for molten carbonate fuel cells
- Theoretical models for design optimization of hydrogen fuel cells and electrolyzers
- TiN, a performing barrier layer for palladium stack used in hydrogen purification stacks
- Two-phase transport in the cathode of PEM fuel cell with a porosity-graded gas diffusion layer
- Using Hydrogen to Reduce and/or Remove Carbon Deposits from SOFC Anodes
71 abstracts