Wednesday, 18 June 2008 13:00 - 14:20

Posters will be on display for the duration of the Conference. Poster presenters will be available to discuss their work during the dedicated poster session.

Numerical Modelling of Single-Chamber Solid Oxide Fuel Cells (SC-SOFCs) Mr Naveed Akhtar, Department of Chemical Engineering/ School of Applied Mathematics, University of Birmingham, Edgbaston, Birmingham B15 2TT, United Kingdom

Hydrogen, RWE and Domotics: energy saving towards zero emissions home Vincenzo Antonucci, CNR-ITAE-Salita S. Lucia sopra Contesse-98126 Messina-Italy, Italy

Effect of flow pattern geometry and operating conditions in PEM fuel cell Maria Argumosa, INTA, Spain Mr Jesus Maellas, INTA, Spain Mr Graciano Martinez, INTA, Spain

designing, manufacturing and optimization of a PEM fuel cell system Saeed Asghari Varzaneh, Isfahan Engineering Research Center, Iran

Hybrid fuel cell supercapacitor system for Hy-IEL electric scooter drive Prof Boleslaw Mazurek, Electrotechnical Institute Wroclaw Division of Electrotechnology and Materials Science, Poland

MEA performance of self-humidified PEMFC Jungyeon Byun, Seoul Nation University, Korea

Two-phase transport in the cathode of PEM fuel cell with a porosity-graded gas diffusion layer Min-Hsing Chang, Department of Mechanical Engineering, Tatung University, Taiwan

Conductivities and Stabilities of Pr-Doped Ceria-Based Electrolytes for IT-SOFCs Mei-Ju Chen, Department of Chemistry, National Taiwan University, Taiwan

Pt Incorporated Hollow Core Mesoporous Shell Carbon Nanocomposite Catalyst for Proton Exchange Membrane Fuel Cells Berker Fıçıcılar, Middle East Technical University, Turkey

Hydrogen fuel cell Vehicles for the 3rd millennium Prof Dr Faten H Fahmy, Egypt

Cross-linked Sulfonated Poly (arylene ether sulfone)s Copolymer for Proton Exchange Membrane Fuel Cells Shaoguang Feng, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084, China

Preparation and photoelctrochemical characterization of CuGaSe 2 thin films for hydrogen production Arturo M Fernandez, CIE-UNAM, Mexico

Characterization of a New Low-Temperature SOFC Cathode Using Electrochemical Impedance Spectroscopy Ruifeng Gao, Tsinghua University, China

Effect of Humidification Temperature on Power Generation Performance in Small Polymer Electrolyte Fuel Cells Mr Yukio Hayashi, Meijo University Graduate School, Japan

Using Hydrogen to Reduce and/or Remove Carbon Deposits from SOFC Anodes Josephine M Hill, University of Calgary, Canada

Electrolytes for Solid Oxide Fuel Cells from Aqueous Tape Casting of YSZ D Hotza, Federal University of Santa Catarina, Brazil

Advances in Electrocatalysis for Hydrogen and Oxygen Electrode Reactions: interactive supported electrocatalysts, d-d-electronic correlations and the effusion effect of primary oxides Professor Milan M Jaksic, University of Belgrade, Faculty of Agriculture, 11,080 Belgrade, Serbia, Yugoslavia

Advanced Design of a Central Manifolding Device Mitigating Massive Flow Resistance in a Polymer Electrolyte Fuel Cell Stack Sukkee Um, School of Mechanical Engineering, Hanyang University, Korea

The catalytic activity of ternary catalysts for Methanol Oxidation Mr Dae Kyu Kang, chonbuk national university, Korea Mr Yeong Il Lee, chonbuk national university, Korea Mr Chang Soo Noh, chonbuk national university, Korea

Development of a double-ejector and its control system to reuse the oxygen for a submarine fuel cell Dr Chang-Soo Kim, Korea Institute of Energy Research, Korea

Effect of sub-zero condition on the performance and properties of GDL in PEFCs Dr Chang-Soo Kim, Korea Institute of Energy Research, Korea

Synthesis and characterization bimodal nanoporous carbon materials for the electro-catalyst in PEFC Dr Chang-Soo Kim, Korea Institute of Energy Research, Korea

Cost minimized design approach for the polymer electrolyte membrane fuel cell stack Dr Chang-Soo Kim, Korea Institute of Energy Research, Korea

Characteristics of hot-pressing condition on the MEAs in a polymer electrolyte fuel cell Changsoo Kim, Korea Institute of Energy Research, Korea

Operation of DMFC stack and diagnosis for the performance degradation Dr Sang-Kyung Kim, Korea Institute of Energy Research, Korea

Preparation and characterization of PtRu/C catalysts for DMFC anode catalyst: Effect of reducing agent concentration during the preparation Doohwan Jung, Korea Institute of Energy Research, Korea

Combined observation of current distribution and two-phase flow in a direct methanol fuel cell Dr Sang-Kyung Kim, Advanced Fuel Cell Research Center, Korea Institute of Energy Research, Korea

Miniature planar stack using the thin Au coated membrane as a current collector Sung Han Kim, Samsung Electro Mechanics, Korea

Benchmarking Capillary Transport Characteristics of Micro-porous Layer in Polymer Electrolyte Fuel Cells Dr Emin C Kumbur, Fuel Cell Dynamics and Diagnostics Lab, Pennsylvania State University, United States

High Response and Low Power Hydrogen Gas Sensor for Fuel Cell Vehicle kyung-il Lee, Research Institute of Industrial Science & Technology, Korea

The preparation and mechanical properties of the LiAlO2 matrix reinforced by metal mesh for molten carbonate fuel cells Dr Tae-Hoon Lim, Korea Institute of Science & Technology, Korea

Fabrication and performance test of anode-supported tubular solid oxide fuel cell with (La, Sr)(Co, Fe)O3-based cathode Tak-Hyoung Lim, Korea Institute of Energy Research, Korea

Performance and fabrication of 1kW class anode-supported flat tubular SOFC stack Tak-Hyoung Lim, Korea Institute of Energy Research, Korea

Reduction of Greenhouse Gas Emissions through Fuel Cell Combined Heat and Power applications Juergen-Friedrich Hake, Forschungszentrum Juelich GmbH, Institute of Energy Research - Systems Analysis and Technology Evaluation (IEF-STE), Germany

Numerical Simulation for Rib and Channel Position Effect on PEMFC Performances Zhixiang Liu, Institute of Nuclear and New Energy Technology, Tsinghua University, China

Nano-SDC for Low Temperature SOFCs Prof Dr Zongqiang Mao, Institute of Nuclear and New Energy Technology, Tsinghua University, China

Properties of selected materials for IT-SOFC electrolyte Dr Grzegorz Pasciak, Electrotechnical Institute Wroclaw Division of Electrotechnology and Materials Science, Poland

AC impedance diagnosis of a small DMFC stack Dr Liang Qi, institute of nuclear and new enerngy techology, tsinghua unviersity, China

Modeling of the transient diphasic mass transport effects on voltage in a PEMFC single cell Dr Julien Ramousse, Institut de Recherche sur l'Hydrogène, Canada

Computer simulation of a polymer electrolyte membrane fuel cell (PEMFC) Dr Angel M Sánchez, University of Vigo, Spain Santiago R Urréjola, University of Vigo, Spain

Operation of the Siemens SOFC Generators CHP100 and SFC5 in a Workshop Massimo Santarelli, Politecnico di Torino, Italy

Development of a 1kW class anode-supported tubular solid-oxide fuel cell in KIER Dong-Ryul Shin, Korea Institute of Energy Research, Korea

Effect of A-site deficiency in (La0.75Sr0.25)1-xFeO3-δ Used as Cathode Materials for Solid Oxide Fuel Cell Dong-Ryul Shin, Korea Institute of Energy Research, Korea

Power Generation Performance of Small Direct Methanol Fuel Cells Mr Takahiro Suzuki, Meijo University Graduate School, Japan

Computer simulation of solid oxide fuel cell (SOFC) Santiago R Urréjola, University of Vigo, Spain Dr Angel M Sanchez, University of Vigo, Spain

Modulating hydrogen combustion system based on a porous media burner for HT-PEM systems Stefan Voss, TU Bergakademie Freiberg, Institute of Thermal Engineering, Germany

Promotion and Characterization of PtAu/C Cathode Catalysts for Oxidation Reduction Reaction Prof Kuan-Wen Wang, nstitute of Materials Science and Engineering, National Central University,Taiwan, Taiwan

SOFC and PEFC combined system Hisataka Yakabe, Tokyo Gas Co., Ltd., Japan Hideki Yoshida, Tokyo Gas Co., Ltd., Japan

La0.6Sr0.4Co0.2Fe0.8O3-Sm0.2Ce0.8O1.9 anode materials for SOFC applicatio Dr Nai-Tao Yang, Shanghai Jiaotong University, China

Effect of gas diffusion layer on the water management in micro-PEMFC stacks Sung-Dae Yim, Korea Institute of Energy Research (KIER), Korea

Improvement of Cathode Performance for Low Temperature Solid Oxide Fuel Cells Sung Pil Yoon, Korea Institute of Science & Technology, Korea

Research into Ta-coated 316L stainless steel as a bipolar plate material for PEMFC Haijun Yu, Energy Center, Beijing General Research Institute for Nonferrous Metals, China